
Melling Engine Priming Tools
Melling Engine Priming Tools are manufactured from the highest quality materials available. These tools will prevent galling problems by circulating oil through critical areas of a new engine before engine start-up.
![]() |
![]() |
![]() |
![]() |
PT10 Small Block & Big Block Chrysler |
PT11 Fords with a 1/4″ hex shaft |
PT12 Fords with a 5/16″ hex shaft |
PT13 Small Block & Big Block Chevrolet |
Melling Screen Installation Tools
![]() |
![]() |
||
MCAT-62 5/8″ diameter tubes |
MCAT-75 3/4″ diameter tubes |
Melling Engine Parts supplies tools for installing press-in type oil pump screen assemblies. The pumpbody should be placed on a small block of wood with the tool straight up and down. Start the screen straight into the hole by twisting and turning by hand before pounding. Under no circumstances should the screen or oil pump be held in a vice. This will lock up the pump by crushing the gear pocket. The tool can be tapped with a hammer until the rolled bead on the collar of the screen tube is flush with the oil pump. This is a metal displacement press fit that only works once.
MELL-LUBE Engine Assembly Lube
![]() |
![]() |
||
M-10012 4 oz. container |
M-10012G 1 Gallon Container |
NEW IMPROVED PROTECTION 1,400 PPM ZINC
MELL-LUBE engine assembly lube contains a special additive that plates wear surfaces to prevent scoring or galling during engine start-up.
MELL-LUBE also contains corrosion inhibitors to prevent rust and pitting to new engines.
NOTE: Not for use on cylinder walls or piston rings.