AFM DOD Delete Kit for GM 5.3L LC9, LH6, LMG & LY5 Engines Melling Part # MDK300
Camshafts, Timing Components, Lifters, GM LS, General Tech
In this video, Melling Technical Director Cale does an introduction to the new AFM DOD Delete Kit for GM 5.3L LC9, LH6, LMG & LY5 AFM DOD Delete Kit. Melling Part # MDK300
Important MDM Delete Notes
•When installing a delete cam, the Active Fuel Management lifters must be replaced using Non-Active Fuel Management lifters.
•The valve lifter guides used in Non-Active Fuel Management engines are different from those used in Active Fuel Management Engines and must be replaced when installing the Non-Active Fuel Management lifters
•The VLOM Must Be Replaced With A Non-Active Fuel Management Valley Cover.
•Pushrod length must be checked during installation to verify that the correct length pushrods are being used
•The vehicle engine control module/Power train control module must be reprogrammed to turn off the Active Fuel Management System in the operating software.
For technical assistance or product recommendations please email us at: https://www.melling.com/contact/tech/ or Call: 517-787-8172, Ext. 2601
Look up parts using our online catalog here: https://www.melling.com/parts-lookup/
DOWNLOAD our updated version of GM LS Mini Catalog https://www.melling.com/wp-content/uploads/2018/12/Melling-Performance-GM-LS-Mini-Catalog-updated-4.21.22-LINEAR.pdf
Thank you for your support of Melling Engine Parts for over 75 years!